The OT-PLC101-N provides a cost-effective way to extend Ethernet connectivity across long distances using existing copper infrastructure. Whether you’re connecting devices in different rooms, extending a network between floors, or linking remote workstations, this 2-wire Ethernet extender eliminates the need for expensive rewiring.
With support for both point-to-point and point-to-multipoint topologies, it offers deployment flexibility for a range of applications. OFDM modulation technology ensures stable, interference-resistant communication, while compliance with IEEE1901 and IEEE802.3 standards guarantees compatibility with most Ethernet devices.
Key Features
1.Extend Ethernet over 2-wire cables, twisted pairs, or phone lines up to 600 meters
2.Compact plastic housing designed for indoor environments
3.Supports point-to-point and point-to-multipoint configurations
4.Plug-and-play setup with zero configuration required
5.OFDM carrier modulation for strong anti-interference performance
6.12–24 VDC power input with low energy consumption
Applications
1.Small Office LAN Extension — Extend network access to meeting rooms or workstations without new cabling.Residential.
2.Networking — Bring Ethernet connectivity to any room using existing telephone or 2-wire lines.
3.Retail & Light Commercial — Cost-effective solution for connecting non-PoE IP cameras and VoIP systems.
4.Event & Exhibition Networking — Temporary network setups without permanent installation.
Compare with other models
OT-PLC302-N: High-performance type with metal enclosure, 600m
OT-PLC-TL24: Din-rail type with metal enclosure, 600m
OT-PLC602-T: Advanced type with additional anti-interference design, 1000m
OT-PLC602-1G: Gigabit high bandwidth type with additional anti-interference design, 1000m
Category | Description | |
Power | Available Voltage Range | 12~24VDC |
Power Consumption | ≤3W/PC | |
Transmission/Rate | Standard Compliance | IEEE1901, IEEE802.3 |
Up Down Agreement | CSMA/CA | |
Bandwidth | Full duplex 100Mbps | |
Physical Characteristic | Dimensions (L×W×H) | 100×86.5×25mm |
Material | PC Alloy | |
Net Weight | 100g/PC | |
Operating Environment | Working Temperature | -20℃~60℃ |
Working Humidity | <95% (Non-condensation) |